GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Front No.1 Speaker
Front No. 1 Speaker
FRONT NO.1 SPEAKER
REMOVAL
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE DOOR INSIDE HANDLE BEZEL
3. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY