GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
5. REMOVE STEERING PAD SWITCH LH
a. Disconnect the switch connectors.
b. Remove the screw.
c. Detach the clip and 2 claws and remove the switch
d. Detach the steering pad switch cable's tabs from the switch, as shown in the illustration.
e. Detach the 2 claws and raise the connector cover.
f.
Hold the connector cover and disconnect the switch from the steering pad switch cable
NOTE: When disconnecting the switch, do not pull the switch's wire harness.
6. REMOVE STEERING PAD SWITCH RH
a. Remove the screw.
b. Detach the clip and 2 claws and remove the switch.