GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
b. Using a screwdriver, remove the clip and support from the vehicle body side.
HINT:
-
Tape the screwdriver tip before use.
-
Remove the support while supporting the hood with your hands.
c. Remove the 2 bolts and hood support.
HINT: Remove the hood support while supporting the hood panel with your hands.
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL HOOD SUPPORT ASSEMBLY
a. Install the 2 clips to the support.
b. Install the support.