GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
b. Using a screwdriver, remove the clip and support from the vehicle body side.
HINT:
-
Tape the screwdriver tip before use.
-
Remove the support while supporting the door panel with your hands.
c. Remove the support.
HINT: Remove the support while supporting the door panel with your hands.
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY
a. Install the 2 clips to the support.
b. Install the support.