GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-1937002.png)
a. Push and hold the release knob in the direction indicated by the arrow in the illustration. Take the mechanical key out of the case.
b. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the cover.
HINT: Tape the screwdriver tip before use.
c. Insert a precision screwdriver into the gap and remove the battery (lithium battery: CR1632).
NOTE:
-
Do not push the terminals with your finger.
-
Do not forcibly pry up the battery. The terminals may be damaged.
-
Do not touch the battery with wet hands. Water may cause rust.
-
Do not touch or move any components inside the transmitter. It may interfere with proper operation.
INSTALLATION
1. INSTALL TRANSMITTER BATTERY
