GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(b) Connect the intelligent tester to the DLC3 with the power switch OFF.
(c)
Remove the 2 ABS motor relays from the engine room No. 3 relay block.
(d) Turn the power switch ON (IG).
NOTICE: Do not start the engine.
(e)
Turn the intelligent tester on and select "DIAGNOSTIC MENU" -> "ABS/VSC" -> "ELECTRONICALLY CONTROLLED BRAKE
SYSTEM UTILITY" -> "ELECTRONICALLY CONTROLLED BRAKE SYSTEM INVALID".
2. FILL RESERVOIR WITH BRAKE FLUID
NOTICE:
^
If brake fluid leaks onto any painted surface, wash or otherwise remove it completely.
^
Do not place the fluid can on the reservoir inlet because brake fluid may overflow.
(a)
Add brake fluid into the reservoir.
Fluid: SAE J1703 or FMVSS No. 116 DOT 3