GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
NOTE: Do not damage the No. 1 and No. 2 brake tube.
e. Release the lock lever and disconnect the actuator connector.
f.
Remove the 2 bolts, nut and brake actuator with bracket.
NOTE: Do not damage the brake tubes.
INSTALLATION
1. INSTALL BRAKE ACTUATOR WITH ACTUATOR BRACKET
a. Install the actuator with bracket to the body with the 2 bolts and nuts.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
NOTE: Do not damage the brake tubes.
b. Connect the actuator connector.
NOTE: Make sure that the connector is locked securely.