GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
2. Check that the level's air bubble is within the red frame.
OK: Level's air bubble is within red frame.
If the bubble is not within the red frame, use a hexagon wrench to adjust screw A until the level's air bubble is within the red frame.
HINT:
-
The adjustable range within the red frame is ±0.2°.
-
The target angle is +0.2° (upward angle of 0.2°).
7. INSTALL FRONT BUMPER COVER
8. INSTALL FRONT FENDER LINER LH
9. INSTALL FRONT FENDER LINER RH
10. INSTALL ENGINE UNDER COVER
11. INSTALL COOL AIR INTAKE DUCT SEAL