GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-582003.png)
1. INSTALL HEATER WATER PUMP ASSEMBLY (w/o Active Stabilizer System)
a. Install the water pump with the bolt.
Torque: 125 N.m (1280 kgf.cm, 92 ft.lbf)
b. Connect the clamp and connector.
2. INSTALL HEATER WATER PUMP ASSEMBLY (w/ Active Stabilizer System)
a. Install the water pump with the 2 bolts.
Torque: 33 N.m (337 kgf.cm, 24 ft.lbf)
b. Connect the clamp and connector.
3. CONNECT HEATER OUTLET WATER HOSE
a. Connect the water hose and install the clip.
