GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
DLC3
(3) Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST 09843-18040
NOTICE:
^
Confirm the terminal numbers before connecting them. Connecting the wrong terminals can damage the engine.
^
When checking the ignition timing, then transmission should be in neutral.
(4) Using a timing light, check the ignition timing.
Standard ignition timing: 8° to 12° BTDC @ idle
(5) Remove the SST from the DLC3.
(6) Check the ignition timing.
Standard ignition timing: 8° to 18° BTDC @ idle
(7) Check that the ignition timing advances immediately when the engine speed is increased.
(8) Disconnect the timing light from the engine.
(9) Install the V-bank cover.