GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-579002.png)
d. Remove the bolt and water with motor and bracket pump assembly.
9. REMOVE WATER WITH MOTOR AND BRACKET PUMP ASSEMBLY (w/ Active Stabilizer System)
a. Remove the 2 clips and disconnect the No. 11 inverter cooling hose and water hose from the water with motor and bracket pump assembly.
b. Disconnect the connector and 2 clamps from the water with motor and bracket pump assembly.
NOTE: Wrap the connectors of the vehicle wire harness and the water with motor and bracket pump assembly with electrical tape to prevent
LLC from contaminating the connectors.
c. Remove the 2 bolts and water with motor and bracket pump assembly.
INSTALLATION
1. INSTALL WATER WITH MOTOR AND BRACKET PUMP ASSEMBLY (w/o Active Stabilizer System)
