GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
a. Install the water with motor and bracket pump assembly with the 2 bolts.
Torque: 22 N.m (224 kgf.cm, 16 ft.lbf)
b. Connect the connector and 2 clamps to the water with motor and bracket pump assembly.
c. Connect the No. 11 inverter cooling hose and water hose to the water with motor and bracket pump assembly with the 2 clips.
3. INSTALL RADIATOR RESERVE TANK ASSEMBLY (w/o Active Stabilizer System)
4. ADD COOLANT (for Inverter)
5. CHECK FOR COOLANT LEAKS (for Inverter)
6. INSTALL NO. 2 ENGINE UNDER COVER
7. INSTALL ENGINE UNDER COVER
8. REMOVE ENGINE ROOM SIDE COVER RH
9. INSTALL ENGINE ROOM SIDE COVER LH
10. INSTALL COOL AIR INTAKE DUCT SEAL