GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
2. INSTALL WATER PUMP PULLEY
(a)
Temporarily install the pulley with the 4 bolts.
(b) Using SST, hold the pulley and tighten the 4 bolts.
SST 09960-10010 (09962-01000, 09963-00700)
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
3. INSTALL WATER INLET
(a)
Install a new gasket to the water inlet housing.
(b) Install a new O-ring to the water outlet pipe.
(c)
Install the water inlet with the 4 bolts and nut.
Torque: 10 N*m (192 kgf*cm, 7 ft.*lbf)
NOTICE: Be careful not to allow the O-ring to get caught between other parts.
(d) Connect the 5 hoses.
4. INSTALL COMPRESSOR WITH MOTOR ASSEMBLY
5. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
6. INSTALL INJECTOR DRIVER
7. INSTALL NO. 1 ENGINE COVER
8. INSTALL NO. 2 ENGINE COVER