GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
4. REMOVE ENGINE ROOM SIDE COVER RH
5. REMOVE ENGINE ROOM SIDE COVER LH
6. REMOVE NO.1 AIR CLEANER INLET
7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
8. REMOVE ENGINE UNDER COVER
9. REMOVE NO.2 ENGINE UNDER COVER
10. DRAIN ENGINE COOLANT
11. REMOVE FRONT BUMPER COVER
12. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
13. REMOVE RADIATOR SUPPORT OPENING COVER
14. REMOVE HOOD LOCK CONTROL CABLE COVER
15. REMOVE HOOD LOCK ASSEMBLY
16. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
a. Using a clip remover, detach the 6 clamps and remove the wire harness.
b. Disconnect the connectors.
c. Remove the 5 bolts and radiator support.