GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Components / Removal / Installation.
2. Reinitialize the power Systems of the vehicle. Refer to TSIB No. PD009-06, "Power System Initialization During PDS".
Clean Air Filter Replacement Procedures
1. Turn the air intake control to recirculated air mode
NOTE
The filter case cannot be removed from the vehicle when the air intake is set to fresh air mode
2. Turn the vehicle "OFF"
3. Open the glove box and remove the partition by pulling it toward you.
4. Pull the filter cover toward you.
5. Push the tabs and pull the filter case toward you.