GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
5.
Disconnect the negative (-) terminal.
6.
Reinstall the left side luggage compartment inner trim cover and clip.
7.
Close the luggage compartment door.
NOTE:
When necessary to move the vehicle, reconnect the negative (-) terminal.
Reconnect the negative (-) terminal on the auxiliary battery:
1.
Remove the left side luggage compartment inner trim cover and then reconnect the negative (-) terminal.
Torque: 6.0 N.m (61 kgf.cm, 4.4 ft.lbf)
2.
Reinstall the left side luggage compartment inner trim cover.
HINT:
After recharging the auxiliary battery, the hybrid system may NOT start. Follow the procedure below to initialize the system.
^
Put the shift lever to the "P" position.
^
Open and close any of the doors.
^
Restart the hybrid system.
NOTE:
Any time the negative (-) battery terminal has been disconnected, systems requiring initialization may need to be re-initialized after the
negative (-) battery terminal has been reconnected.
Disconnect the negative (-) terminal on the active stabilizer battery:
1.
Turn OFF all lights, accessories, and the hybrid system.
2.
Open the luggage compartment.
3.
Remove the deck board and luggage tray.