GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
c. Install the hybrid vehicle converter with the 4 bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
CAUTION: Wear insulated gloves.
d. Connect the 2 frame wires (high voltage cable) with the 2 connectors and 4 clamps.
CAUTION: Wear insulated gloves.
NOTE:
-
Connect the wire wrapped with red tape to the terminal indicated by the "+" mark of the HV relay and the wire not wrapped with red tape
to the terminal indicated by the "-" mark of the HV battery.
-
Make sure that the connectors are engaged securely.
4. INSTALL NO. 6 BATTERY CARRIER PANEL
a. Install the No. 6 battery carrier panel with the 7 bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
CAUTION: Wear insulated gloves.
NOTE: Do not drop the bolts in the cooling air inlet.
5. INSTALL BATTERY CARRIER SUB-ASSEMBLY