GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-657004.png)
a. Connect the 3 connectors.
b. Attach the integration relay to the engine room No. 2 relay block.
c. Install the engine room No. 1 relay block cover.
7. INSTALL ENGINE ROOM SIDE COVER LH
8. INSTALL COOL AIR INTAKE DUCT SEAL
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
a. Perform initialization procedure.
NOTE: Some vehicle systems require initialization after reconnecting the cable to the negative battery terminal.
