GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-665006.png)
a. Install the high voltage fuse with 2 new nuts.
Torque: 4.0 N.m (41 kgf.cm, 35 in.lbf)
CAUTION: Wear insulating gloves.
NOTE: Be sure to use a torque wrench to tighten the nuts.
2. INSTALL INVERTER WITH CONVERTER ASSEMBLY
a. Install the inverter with converter assembly with 4 new bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
CAUTION: Wear insulating gloves.
NOTE: 2 people are needed to remove the inverter with converter assembly.
