GS 450h V6-35L (2GR-FSE) Hybrid (2007) Fog/Driving Lamp Component Information Diagrams
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE COOL AIR INTAKE DUCT SEAL
3. REMOVE ENGINE UNDER COVER
4. REMOVE FRONT FENDER LINER LH
5. REMOVE FRONT FENDER LINER RH
6. REMOVE FRONT BUMPER COVER
7. REMOVE FOG LIGHT ASSEMBLY
a. Remove the bolt.
b. Detach the 2 claws and remove the fog light.
8. REMOVE FOG LIGHT BULB
a. Turn the fog light bulb in the direction indicated by the arrow and remove it.
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed given are for the LH side.
1. INSTALL FOG LIGHT BULB
a. Install the fog light bulb.
b. Turn the fog light bulb in the direction indicated by the arrow and install it.