GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
c. Remove the nut and height control sensor link from the lower arm.
d. Remove the 2 bolts and sensor.
3. REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR
a. Remove the rear tire.
b. Disconnect the connector.
c. Put matchmarks on the sensor link and bracket.
d. Remove the 2 bolts and sensor.
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed given are for the LH side.
1. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR