GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Tail Lamp: Testing and Inspection
ON-VEHICLE INSPECTION
1. CHECK REAR COMBINATION LIGHT ASSEMBLY
a. Disconnect the X1 and X3 connectors.
b. Connect the voltmeter's positive (+) lead to terminal X1-7 and the negative (-) lead to terminal X1-6.
c. Connect the voltmeter's positive (+) lead to terminal X3-2 and the negative (-) lead to terminal X3-6.
d. Measure the voltage of the connector.
e. Connect the voltmeter's positive (+) lead to terminal X1-5 and the negative (-) lead to terminal X1-6.
f.
Connect the voltmeter's positive (+) lead to terminal X3-5 and the negative (-) lead to terminal X3-6.
g. Measure the voltage of the connector.
2. CHECK REAR LIGHT ASSEMBLY