GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Alignment: Service and Repair
Rear Wheel Alignment
REAR WHEEL ALIGNMENT
ADJUSTMENT
1. INSPECT TIRE
(a)
Inspect the tires.
2. MEASURE VEHICLE HEIGHT
(a)
Measure the vehicle height.
3. INSPECT TOE-IN
Standard toe-in
If the toe-in is not within the specified range, inspect the suspension parts and replace if necessary.
4. ADJUST TOE-IN
(a)
Loosen the toe adjust cam nut.
(b) Turn the adjust cams by an equal amount to adjust toe-in.
HINT:
^
Try to adjust the toe-in to the center value.
^
The toe-in will change by the following specifications corresponding to each graduation of the cam.
Approx. 4.0 mm (0.16 in.)
(c)
Tighten the nut.
Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf)