GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
No apply after tightening with specified torque.
2. INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
3. INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
4. INSPECT TIRE
(a)
Inspect the tire.
5. REGISTER TRANSMITTER ID
(a)
Register the transmitter ID.
6. INSPECT TIRE PRESSURE WARNING SYSTEM
(a)
Inspect the tire pressure warning system.
DISPOSAL
HINT:
The tire pressure monitor valve is powered by a lithium battery. When disposing of the tire pressure sensor, remove the battery and dispose of it
correctly.
1. DISPOSE OF TIRE PRESSURE WARNING VALVE SUB-ASSEMBLY
(a)
Use the tip of a screwdriver to pry off the back cover.
(b) The battery and base board covered with resin are exposed. While taking out the battery, cut the 2 terminals that connect the battery to the
base board.