GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
a. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
b. Connect the connector.
2. INSTALL CONSOLE BOX SUB-ASSEMBLY
3. INSTALL REAR CONSOLE ARMREST ASSEMBLY
4. INSTALL CONSOLE BOX
5. INSTALL CONSOLE BOX REGISTER ASSEMBLY
6. INSTALL CONSOLE BOX PLATE
7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
9. INSTALL CONSOLE UPPER PANEL ASSEMBLY
10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.