GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-837028.png)
-
YAW RATE SENSOR COMMUNICATION STOP MODE.
-
STEERING ANGLE SENSOR COMMUNICATION STOP MODE.
-
SEAT BELT CONTROL ECU COMMUNICATION STOP MODE.
-
STEERING CONTROL ECU COMMUNICATION STOP MODE.
-
ABSORBER CONTROL ECU COMMUNICATION STOP MODE.
-
NETWORK GATEWAY ECU COMMUNICATION STOP MODE.
-
POWER STEERING ECU COMMUNICATION STOP MODE.
-
HYBRID VEHICLE CONTROL ECU COMMUNICATION STOP MODE.
-
FRONT ACTIVE STABILIZER CONTROL ECU COMMUNICATION STOP MODE.
-
REAR ACTIVE STABILIZER CONTROL ECU COMMUNICATION STOP MODE.
Multiplex Communication System
DIAGNOSIS SYSTEM
1. DESCRIPTION
a. The network gateway ECU controls the functions of the multiplex communication system of the vehicle. Data of the multiplex communication
system and the Diagnostic Trouble Codes (DTC) can be read through the Data Link Connector 3 (DLC3) of the vehicle.
2. CHECK DLC3
a. The ECU uses ISO 15765-4 for communication. The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO
15765-4 format.
If the result is not as specified, the DLC3 may have a malfunction. Repair or replace the harness and connector.
