GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Step 20 (Continued)
INSPECTION PROCEDURE
NOTE: Turn the power switch OFF before measuring the resistances of the main wire and the branch wire.
HINT: Operating the power switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes resistance
variation.
Short to B+ in CAN Bus Line
Short to B+ in CAN Bus Line
DESCRIPTION
There may be a short circuit between the CAN bus line and +B when there is resistance between terminals 6 (CANH) and 16 (BAT) or terminals 14
(CANL) and 16 (BAT) of the DLC3.