GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
a. Using SST, install the sensor to the exhaust manifold RH.
SST 09224-00010
Torque:
40 N.m (408 kgf.cm, 30 ft.lbf) for use with SST
44 N.m (449 kgf.cm, 32 ft.lbf) for use without SST
HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
a. Using SST, install the sensor to the exhaust manifold LH.
SST 09224-00010
Torque:
40 N.m (408 kgf.cm, 30 ft.lbf) for use with SST
44 N.m (449 kgf.cm, 32 ft.lbf) for use without SST
HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
4. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
5. INSTALL POWER STEERING ECU ASSEMBLY
a. Install the power steering ECU.
6. INSTALL FRONT EXHAUST PIPE ASSEMBLY