GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
a. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the sensor connector.
4. INSTALL VVT SENSOR (for Intake Side of Bank 1)
a. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the sensor connector.
5. INSTALL V-BANK COVER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.