GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
NOTE: Pull and remove the fuel pipe in a straight line to avoid damage to the seal surface of the delivery pipe's O-ring.
b. Remove the O-ring, backup rings and E-ring from the No. 3 fuel pipe.
29. REMOVE NO. 2 FUEL DELIVERY PIPE
a. Disconnect the 3 wire harness clamps.
b. Remove the 2 bolts and 2 nuts.
c. With the connectors still connected, disconnect the No. 2 fuel delivery pipe.
NOTE:
-
Make sure that the fuel delivery pipe is disconnected from the delivery pipe (LH side).
-
Be extremely careful not to touch or strike the tips of the injectors.
-
Pull and remove the fuel pipe in a straight line without tilting it.
d. Disconnect the 3 injector connectors.
e. Remove the 3 injector vibration insulators from the cylinder head.
30. REMOVE NO. 1 FUEL DELIVERY PIPE