lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Procedures|Page 9977 > < Procedures|Page 9975
Page 30
background image

g. Deploy the airbag.

1. Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
2. Check that no one is within a 10 m (33 ft.) radius of the tire which the rear seat side airbag is tied to.
3. Press the SST activation switch and deploy the airbag.

CAUTION:  When deploying the airbag, make sure that no one is near the tire.

HINT:  The airbag is deployed as the LED of the SST activation switch comes on.

h. Dispose of the rear seat side airbag.

CAUTION:
-

The rear seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.

-

Use gloves and safety glasses when handling a rear seat side airbag with a deployed airbag.

-

Do not apply water to a rear seat side airbag with a deployed airbag.

-

Always wash your hands with water after completing the operation.

1. Remove the rear seat side airbag from the tire.
2. Place the rear seat side airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.

Steering Pad

DISPOSAL

HINT:  When scrapping a vehicle equipped with the SRS or disposing of the steering pad, be sure to deploy the airbag first in accordance with the
procedure described. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.

CAUTION:

-

Never dispose of a steering pad that has an unactivated airbag.

-

The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to
nearby residents.

-

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from
electrical noise.

-

When deploying the airbag, perform the operation at least 10 m (33 ft.) away from the steering pad.

-

The steering pad becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.

-

Use gloves and safety glasses when handling a steering pad with a deployed airbag.

-

Do not apply water, etc. to a steering pad with a deployed airbag.

-

Always wash your hands with water after completing the operation.

1. DISPOSE OF STEERING PAD (WHEN INSTALLED IN VEHICLE)

HINT:  Prepare a battery as the power source to deploy the airbag.

Procedures|Page 9977 > < Procedures|Page 9975