GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
HINT: Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".
3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
4. REMOVE NO. 1 HEATER TO REGISTER DUCT
5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
a. Disconnect the 2 connectors and remove the instrument panel wire assembly from the front passenger airbag.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
b. Remove the 2 screws.
c. Disengage the 5 hooks (A).
d. Disengage the 5 hooks (B) and remove the front passenger airbag from the instrument panel.
INSTALLATION
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY