GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
discoloration on the driver side knee airbag.
2. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check.
b. With the driver side knee airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the
driver side knee airbag with a new one:
-
Cuts, minute cracks or marked discoloration on the driver side knee airbag.
-
Cracks or other damage to the connector.
-
Deformation or cracks on the instrument panel reinforcement.
CAUTION: For removal and installation procedures of the driver side knee airbag, be sure to follow the correct procedure.
Front Passenger Airbag Assembly
ON-VEHICLE INSPECTION
1. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the
instrument panel with a new one:
Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.
2. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)