GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
pretensioner activation.
2. REMOVE FRONT DOOR SCUFF PLATE
3. REMOVE REAR DOOR SCUFF PLATE
4. REMOVE CENTER PILLAR GARNISH LOWER
5. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY
a. Disconnect the pretensioner connector as shown in the illustration labeled A.
b. Disconnect the tension reducer connector labeled B.
c. Disconnect the pre-collision connector labeled C.
d. Remove the 2 bolts and disconnect the front seat outer belt assembly.
6. REMOVE FRONT SEAT BELT RETRACTOR COVER
a. Disengage the claw and remove the front seat belt retractor cover from the body.
7. REMOVE WIRE HARNESS PROTECTOR