GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-1720005.png)
b. Connect the pretensioner connector labeled A, as shown in the illustration.
c. Connect the tension reducer connector labeled B.
d. Connect the pre-collision connector labeled C.
5. INSTALL CENTER PILLAR GARNISH LOWER
6. INSTALL REAR DOOR SCUFF PLATE
7. INSTALL FRONT DOOR SCUFF PLATE
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
10. CHECK SRS WARNING LIGHT
a. Check the SRS warning light.
