GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table given, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when
deciding whether a part is faulty or not.
a. Warm up the engine.
b. Turn the power switch OFF.
c. Connect the intelligent tester (with CAN VIM) to the DLC3.
d. Turn the power switch ON.
e. Turn ON the intelligent tester.
f.
Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DATA LIST.
Part 1
Part 2
g. According to the display on tester, read the "DATA LIST".