GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
a. Install the package tray trim panel.
1. Connect the connector.
2. Attach the 5 claws and clip, and install the panel.
4. INSTALL ROOF SIDE GARNISH INNER
5. INSTALL REAR SEAT SIDE GARNISH
6. INSTALL REAR DOOR SCUFF PLATE
7. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
a. Install the seat belt with the bolt as shown in the illustration.
b. Connect the connector labeled A.
NOTE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)