GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
5. REMOVE FRONT DOOR SCUFF PLATE LH
6. REMOVE FRONT DOOR OPENING TRIM COVER LH
a. Using a moulding remover, detach the 3 claws and remove the trim cover.
7. REMOVE INSTRUMENT SIDE PANEL LH
8. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
9. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Remove the 2 screws.
b. Using a screwdriver, detach the 2 claws.
HINT: Tape the screwdriver tip before use.
c. Remove the control panel and then disconnect the connector.
INSTALLATION
1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Connect the connector.
b. Attach the 2 claws to install the control panel.
c. Install the 2 screws.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
4. INSTALL INSTRUMENT SIDE PANEL LH