GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Height Control Sensor
HEIGHT CONTROL SENSOR
REMOVAL
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed given are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT
a. Remove the front tire.
b. Disconnect the connector.