GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-273002.png)
a. Remove the 4 screws, vent tube set plate, support plate and gasket.
INSTALLATION
1. INSTALL FUEL TANK VENT TUBE SET PLATE
a. Install a new gasket, support plate and set plate with the 4 screws.
2. INSTALL FUEL PRESSURE SENSOR
a. Install the sensor to the support plate.
CAUTION: Check that there are no scratches or foreign objects on the connecting parts.
b. Fix the sensor in place with the joint clip with the joint clip.
CAUTION:
