GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
1. INSPECT TRANSMISSION CONTROL SWITCH
(a)
Connect the shift lever position switch connector.
(b) Disconnect the transmission control switch connector of the shift lock control unit assembly.
(c)
Measure the resistance according to the value(s) in the table.
Standard Resistance
If the resistance value is not as specified, replace the transmission control switch.
INSTALLATION
1. INSTALL TRANSMISSION CONTROL SWITCH
(a)
Install the transmission control switch to the shift lever guide housing.
HINT:
Securely engage the claws.