GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(b) Loosen bolt (A) and remove bolt (B), then slide the No. 2 steering intermediate shaft.
HINT:
^
Do not remove bolt (A).
^
Do not disconnect the No. 2 steering intermediate shaft from the power steering link.
(c)
Put matchmarks on the No. 2 steering intermediate shaft and the power steering link.
(d) Disconnect the No. 2 intermediate shaft from the power steering link.
8. DISCONNECT TIE ROD END LH
(a)
Remove the clip and the castle nut.
(b) Using SST, disconnect the tie rod end LH from the steering knuckle.
SST 09628-00011
NOTICE:
^
Hang SST with a string, etc. to prevent it from falling.
^
Do not damage the front disc brake dust cover.
^
Do not damage the ball joint dust cover.
^
Do not damage the steering knuckle.
9. DISCONNECT TIE ROD END RH
HINT:
Perform the same procedure as for the LH side.