GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(a)
Install the lock nut and the tie rod end to the rack end until the matchmarks are aligned.
HINT:
After adjusting toe-in, torque the lock nut.
6. INSTALL TIE ROD END RH
HINT:
Perform the same procedure as for the LH side.
INSTALLATION
1. INSTALL POWER STEERING LINK ASSEMBLY
(a)
Install the power steering link with the 2 bolts, 2 wasters and 2 nuts.
Torque: 118 N*m (1,200 kgf*cm, 87 ft.*lbf)
(b) Install the power steering earth wire to the power steering link with bolt (B).
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
(c)
Connect wire harness connector (E) to the power steering link and securely lock the connector.
(d) Connect 2 wire harness connectors (C) and (D) to the power steering link.
(e)
Install the 2 wire harness clamps to the power steering link.
(f)
Connect the earth wire to the bracket with bolt (A).
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. CONNECT TIE ROD END LH