GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-1504013.png)
5. INSTALL FRONT SUSPENSION MEMBER PROTECTOR LOWER
(a)
Install the front suspension member protector lower to the front suspension crossmember with the 4 bolts.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
6. INSTALL NO. 2 ENGINE UNDER COVER
7. INSTALL ENGINE UNDER COVER
8. INSTALL FRONT WHEELS
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
11. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
(a)
Inspect and adjust front wheel alignment.
12. PERFORM INITIALIZATION
(a)
Perform initialization.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
13. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT
(a)
Initialize the rotation angle sensor and calibrate torque sensor zero point.
14. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(a)
Perform variable gear ratio steering system calibration.
