GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(b) Temporarily install the bolt, washer and nut.
(c)
Install the front lower ball joint with the 2 bolts.
Torque: 120 N*m (1,220 kgf*cm, 89 ft.*lbf)
5. TEMPORARILY INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING
(a)
Insert the bolt from the rear of the vehicle, and install the front shock absorber lower side on the front suspension lower arm. Temporarily
install the nut while holding the bolt.
6. CONNECT FRONT STABILIZER LINK ASSEMBLY
7. CONNECT TIE ROD ASSEMBLY
8. CONNECT FRONT SPEED SENSOR
9. CONNECT FRONT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY
10. STABILIZE SUSPENSION
11. TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING
(a)
Tighten the bolt on the lower side of the front shock absorber while holding the nut.