GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(b) Insert the bolt from the rear of the vehicle, and install the front shock absorber lower side on the front suspension lower arm.
(c)
Temporarily install the nut while holding the bolt.
(d) Tighten the lock nut.
Torque: 28 N*m (286 kgf*cm, 21 ft.*lbf)
2. INSTALL ABSORBER CONTROL ACTUATOR (for AVS)
(a)
Install the absorber control actuator to the actuator support bracket.
(b) Turn the actuator clockwise 40° until a click is felt.
NOTICE:
Do not turn the actuator more than 40°.