GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
6. TEMPORARILY TIGHTEN REAR UPPER NO. 1 CONTROL ARM ASSEMBLY
(a)
Temporarily tighten the rear upper control arm to the rear axle carrier with the bolt, washer and nut.
HINT:
Install the bolt from the rear side of the vehicle and lightly tighten the bolt.
7. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY
(a)
Temporarily tighten the rear suspension arm to the rear axle carrier with the bolt and nut.
HINT:
Install the bolt from the rear side of the vehicle and lightly tighten the bolt.
8. TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY
(a)
Temporarily tighten the rear suspension arm to the rear axle carrier with the bolt and nut.
HINT:
Install the bolt from the rear side of the vehicle and lightly tighten the bolt.