GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Tape the screwdriver tip before use.
2. REMOVE TIRE AND WHEEL
(a)
Remove the 5 nuts, and tire and wheel from the vehicle.
3. REMOVE WHEEL HUB GARNISH SUB-ASSEMBLY
(a)
On the inner side of the wheel, loosen the 2 nuts while fixing the wheel hub garnish in place.
NOTICE:
When loosening the nuts, replace the wheel hub garnish with a new one if the bolts become loose.
(b) Remove the 2 nuts and wheel hub garnish.
INSTALLATION
1. INSTALL WHEEL HUB GARNISH SUB-ASSEMBLY
(a)
Install the wheel hub garnish with the 2 nuts.
Torque: 6.0 N*m (60 kgf*cm, 53 in.*lbf)
NOTICE:
^
Scratches on the wheel hub garnish or wheel may cause abnormal noises during driving.
^
When tightening and installing the nuts, replace the wheel hub garnish with a new one if the bolts become loose.
2. INSTALL TIRE AND WHEEL
(a)
Install the tire and wheel to the vehicle with the 5 nuts.
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
3. INSTALL WHEEL HUB ORNAMENT SUB-ASSEMBLY
(a)
Install the wheel hub ornament.