GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-1093002.png)
COMPONENTS (Part 2)
REMOVAL
CAUTION:
Be sure to perform the procedure as described below. Do not turn the power switch on (READY) before the cable has been connected to the
negative battery terminal.
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE BATTERY SERVICE HOLE COVER LH
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE COOL AIR INTAKE DUCT SEAL
