GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(d) Remove the 2 screws and shift lock control ECU sub-assembly.
8. REMOVE TRANSMISSION CONTROL SWITCH
(a)
Remove the transmission control switch from the shift lever guide housing.
ADJUSTMENT
1. INSPECT SHIFT LEVER POSITION
(a)
Apply the parking brake.
(b) Lock the wheels with chocks to secure the vehicle.
(c)
Turn the power switch on (READY).
(d) Move the shift lever to the D position and release the brake pedal.
NOTICE:
Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.
(e)
Slowly move the shift lever to the N position and measure moving distance (A) of the shift lever from the original point to the gear activation
point.
NOTICE:
Be sure to move the shift lever slowly.
(f)
Move the shift lever to the R position and release the brake pedal.
NOTICE:
Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.
(g) Slowly move the shift lever to the N position and measure moving distance (B) of the shift lever from the original point to the vehicle
activation point.
NOTICE:
Be sure to move the shift lever slowly.
(h) Check that moving distances (A) and (B) shown in the illustration are almost the same.